Stanley A Meyer VIC Resonance 

Page as a Pdf.png

The Information is here, we have gone to great lengths to show the information. If you study how to test resistance  resonance in your coils chokes and water cells before assembly it will help you to gain the insights needed to assemble correctly and understand the methods.

Many a Person has missed the opportunities for guidance.

Your Support us we Support you . 

Stanley A Meyer

Dual-Inline RLC Network 

Stanley A Meyer Dual Inline RLC Network.

To  Understand How this works you need to experiment and test with a Sinusoidal Generator

Here is example Circuit

Types of LC Circuits

Stanley A Meyer Parallel LC Circuit 2.pn
Stanley A MeyerSerial LC Circuit.png
Stanley A MeyerSerial LC Circuit 2.png
Stanley A MeyerSerial LC Circuit 4.png
Stanley A MeyerSerial LC Circuit 5.png
Now we Connector 2 Inductor's  and Diode
( Diode Between Ca inductor and Capacitor)
Stanley A MeyerSerial LC Circuit 6.png
Stanley A MeyerSerial LC Circuit 7.png

Now we Add a 1 Kilo Ohm Resistor in Parallel to the WFC/ Capacitor to examine the signals

Stanley A MeyerSerial LC Circuit 8.png
Stanley A MeyerSerial LC Circuit 9.png

So We See that now that the Resistor is effecting the resonance, (Stan Must have used it as a adjustment to balance resonance back)              For example in the case that cell has a dbd barrier or layer of glass for example. which would cause a imbalance by which the resistor rebalances

Stanley A MeyerSerial LC Circuit 10.png
Stanley A MeyerSerial LC Circuit 11.png
Stanley A MeyerSerial LC Circuit 12.png

How to Work with

"Cold Resonance":

Study More
Stanley A Meyer Resonance

How to work "Cold Resonance":

https://www.youtube.com/watch?v=zilvq...

https://www.youtube.com/watch?v=EYVv8...

https://www.youtube.com/watch?v=A2eJf...

My circuit diagram:

http://alfa.kachi-snimka.info/images-...

My Bifilar Inductor on Ferrite E-Core

http://prikachi.com/images/287/790128...

 

Memo WFC 420 http://www.sentex.ca/~mec1995/hho/Mey...

 

Dr. Andrija Puharich`s Patent for "Water Decomposition by AC Electrolysis": http://www.rexresearch.com/puharich/1...

 

Patent GB 2.324.307A - Electrostatic Electrolyse method http://www.tuks.nl/pdf/Patents/Eccles...

SHOW LESS

How to Measure Resonance in a Hydrogen HHO Water Cell 

How to Measure Resonance in a Water Cell

Stanley Meyer is absolutely right! The Water not have "Resonance frequency", but the Water Cell have "Self Resonance frequency" !

 

In this experiment i use one 4-inch Cell. Distance between the Electrodes is about 2.5 mm. Water Conductivity - 113 µS/cm. !!!!!

 

Note, the Yellow Channel Wavegorm (Generator`s output): 14:30 minute, at 7.3 MHz !!!!!

 

As you see, this is "known waveform" of SERIAL RESONANCE !!!

 

 

Stanley Meyer's Patent EP0103656A2: https://www.google.com/patents/EP0103...

Back up here

 

My circuit diagram: http://prikachi.com/images/987/894398...

 

Link to a similar research:

http://www.intechopen.com/books/elect...

Back up here 

 

The key to understand Stanley Meyer's technology, is a "Resonant waveform", presented in the Patent US 2005/0246059 A1, of

Stephen Meyer (Stanley Meyer's twin brother).

he key to understand Stanley Meyer's technology, is a "Resonant waveform", presented in the Patent US 2005/0246059 A1, of Stephen Meyer (Stanley Meyer's twin brother). Stephen Meyer`s Patent US 2005/0246059 A1: https://drive.google.com/open?id=1_0f...

 

My Circuit diagram: https://drive.google.com/open?id=14sE... Used values: Resonant frequency - 789 kHz !!!! (This is not a joke) Gate frequency - 31.5 kHz !!! Gate "Duty/Cycle" - 28 % Bifilar inductor - 2 x 100 turns, 0,5mm., copper wire on ferrite core.

 

The Signal to the Primary coil is "Inversed" Pulse train" !!!! (like at Meyer`s VIC!) The Self Resonant frequency of the Bifilar inductor, at "1:1 Resonance" is about 43 kHz. Very important!!!

 

Note, that the "Gate generator" (Low frequency generator) must be tuned about 27 % less than "Self Resonant frequency" of the Bifilar inductor /43 kHz - 27 % = about 31 kHz/!!! Then, "High frequency generator", may be at 500 kHz to 1,5 MHz !!!! !!!!!!!!!!!!!

 

Stephen Meyer`s Used values: Resonant frequency - 13,5 kHz Gate frequency - 496,9 Hz Gate "Duty/Cycle" - about 40 % The the Internet, ago has info that Stanley Meyer uses the following values: Resonant frequency - 42.8 kHz Gate frequency - 600 Hz Gate "Duty/Cycle" - 50%

 

And, a very interesting fact: "Recently we learned that the Water Disrupting Spark Plug promoted around 1994 by Stan Meyers was in fact suggested to him by Dale Pond at a conference in Switzerland back in 1989.

 

The idea was you should be able to use Keely's 42.8khz emitted from a spark plug to instantly dissociate the water molecule to hydrogen and oxygen which would then be exploded to drive the piston." Another, successful replication of the Stephen Meyer`s Waveform, from Tony Woodside: https://www.youtube.com/watch?v=cX6yY...

 

Stanley Meyer's WO 92/07861: http://www.rexresearch.com/meyerhy/wo... "In the invention, the adjustable frequency generator (Figure 12) /Gated generator/, tunes into the resonant condition of the circuit including the water cell and the water therein."!!!!!

 

"Shape and size of the resonant cavity may vary. Larger resonant cavities and higher rates of consumption of water in the conversion process require higher frequencies such as up to 50 KHz and above. The pulsing rate, to sustain such high rates of conversion must be correspondingly increased."!!!

 

"Also, at a resonant condition harmonic effects occur. In a typical operation of the cell with a representative water capacitor described below, at a frequency of about 5 KHz at unipolar pulses from 0 to 650 volts at a sensed resonant condition into the resonant cavity, conversion of about 5 gallons of water per hour into a fuel gas will occur on average. "!!!

Stephen Meyer`s Waveform replication

 

•2 Sep 2018

Stanley Stephen Meyer Signal Circuit Res

Water Resonance Waveform

 •7 Oct 2018

Water (1).JPG

The key to understand Stanley Meyer's technology, is a "Resonant waveform", presented in the Patent US 2005/0246059 A1, of Stephen Meyer (Stanley Meyer's twin brother).

 

Stephen Meyer`s Patent US 2005/0246059 A1: https://drive.google.com/open?id=1_0f...

My Circuit diagram: https://drive.google.com/open?id=19r4...

Bobbins on Air core - 0,3mm. copper wire,

Bifilar wrapped: https://drive.google.com/open?id=1rdq...

Another, successful replication of the Stephen Meyer`s Waveform, from Tony Woodside: https://www.youtube.com/watch?v=cX6yY...

Stanley Meyer's WO 92/07861: http://www.rexresearch.com/meyerhy/wo...

 

"In the invention, the adjustable frequency generator (Figure 12) /Gated generator/, tunes into the resonant condition of the circuit including the water cell and the water therein."!!!!!

 

"Shape and size of the resonant cavity may vary. Larger resonant cavities and higher rates of consumption of water in the conversion process require higher frequencies such as up to 50 KHz and above.

 

The pulsing rate, to sustain such high rates of conversion must be correspondingly increased."!!! "Also, at a resonant condition harmonic effects occur. In a typical operation of the cell with a representative water capacitor described below,

 

at a frequency of about 5 KHz at unipolar pulses from 0 to 650 volts at a sensed resonant condition into the resonant cavity, conversion of about 5 gallons of water per hour into a fuel gas will occur on average. "!!!

Bobbins on Air core - 0,3mm. copper wire, Bifilar wrapped:

Stanley A Meyer Coils Resonance Air Core

How to Learn what Resonance is >?

These Circuit are mentioned in this video so I put them here so you can compare to your work

Stanley A Meyer VOLTAGE AMPLITUDE CONTROL
Stanley A Meyer Variable and Gated Pulse
Stanley A Meyer RESONANT SCANNING.JPG
Stanley A Meyer PHASE LOCK LOOP.JPG
PULSER INDICATOR + CELL DRIVER (1).JPG
Stanley A Meyer Cell Driver Circuit.png
Stanley A Meyer VIC 2020 BASIC WORKING
Stanley A Meyer Wave Frequency
Stanley A Meyer Wave Frequency
Stanley A Meyer Wave Frequency
Stanley A Meyer VIC Circuit
Stanley A Meyer VIC Circuit

In the invention, the water capacitor is subjected to a duty pulse which builds up in the resonant changing choke coil and then collapses.

 

This occurrence permits a unipolar pulse to be applied to the fuel cell capacitor. When a resonant condition of the circuit is locked-in by the circuit, amp leakage is held to a minimum as the voltage which creates the dielectric field tends to infinity.

 

At start up, in this example, current draw through the water cell will measure about 25 milliamp; however, when the circuit finds a tuned resonant condition, current drops to a 1-2 milliamp minimum leakage condition.

 

In a typical operation of the cell with a representative water capacitor described below, at a frequency of about 5 KHz at unipolar pulses from 0 to 650 volts at a sensed resonant condition into the resonant cavity, conversion of about 5 gallons of water per hour into a fuel gas will occur on average.

 

The diode is an electronic switch that determines the generation and collapse of an electromagnetic field to permit the resonant charging choke(s) to double the applied frequency and also allows the pulse to be sent to the resonant cavity without discharging the capacitor therein.

 

The transformer core is a pulse frequency doubler.

 

My Circuit diagrams:

https://drive.google.com/open?id=0Bxn...

https://drive.google.com/open?id=0Bxn...

https://drive.google.com/open?id=0Bxn...

https://drive.google.com/open?id=0Bxn...

<